UDC

TITLE OF THE ARTICLE  IN UKRAINIAN

First Name Last Name, First Name Last Name….  in Ukrainian

TITLE OF THE ARTICLE  IN ENGLISH

First Name Last Name, First Name Last Name….  in English

Abstract in Ukrainian
Keywords in Ukrainian

Abstract in English
Keywords in English

  1. Introduction

  2. Literature review and problem statement

  3. The aim and objectives of the study

  4. Materials and methods  

  5. Results 

  6. Discussion of results

  7. Conclusion

Conflict of interest
It is necessary to indicate the absence or presence of a conflict of interest. If there is a conflict of interest, it must be specified.
When there is no conflict of interest, it is necessary to specify the phrase:
The authors declare that they have no conflict of interest in relation to this research, whether financial, personal, authorship or otherwise, that could affect the research and its results presented in this paper.

Financing
Sources of funding must be indicated. If there is no funding, it is necessary to indicate:
The study was performed without financial support.

Acknowledgments

Requirments for article forming

Indicate the author's contribution according to CRediT (Author Role Taxonomy) in the format:

Author 1 First name Last name: contribution 1, contribution 2, contribution 3; 
Author 2 First name Last name: contribution 1, contribution 2, contribution 3

References
References
Information about authors in Ukrainian
Information about authors in English

• It does not contain abbreviations.
• Strictly correspond to the content of article.

• Not less than 1800 characters with spaces, including keywords.
• No more than 1900 characters with spaces, including keywords.

• It does not contain abbreviations that are understandable only from the context of article.

• No more than 10 words.
• Do not contain abbreviations that are understandable only from the context of article.
• Separated by commas.

• Image size: the minimum required size for the graphical abstract is 560 × 1100 pixels (height × width) with minimum resolution of 300 dpi. If you are submitting a larger image, please use the same ratio. Please note that your image will be scaled proportionally to fit in the available window.
• Font: please use font with a large enough font size as the image will be reduced in size for the table of contents to fit a window.
• File type: .jpg, .jpeg, .png.
• File size: no more than 5 MB.

• In order to make figures in good quality, you can use our video lessons at the link. 
  (A strong request - do not use Microsoft Paint to create or edit your figures. This editor gives a maximum resolution of 120 dpi, which does not meet the requirements of our magazine).
• Before a figure, there must be a reference to the it in the form of Fig. 1, Fig. 2–4, Fig. 5, a. The reference to the figure must be in the same section/subsection as the figure itself.
• The caption under a figure should take the form: Fig. 1. The title of the figure.
• If the figure consists of several subfigures, the caption should take the form: Fig. 1. The title of the figure: a ‒ the name of the first subfigure; b ‒ the name of the second subfigure...
• If there are designations or abbreviations in the figure, the transcript of which were not given earlier in the text, then those should be explained in the text under the figure. For example, the figure shows three charts, which are marked, respectively, by numbers 1, 2, and 3. Then the text under the figure should take the form: Fig. 1. Title: 1 ‒ chart 1; 2 ‒ chart 2; 3 ‒ chart 3.
• Caption under the figure must be part of the text.
• Figures should be streamlined "In text."
• The inscriptions in the figure should not be bold or italic.
• All inscriptions in the figure must be written in one font and one size. The exception is screenshots of programs that do not allow one to edit the font.
• The indices in the figure should take the same form as the indices in the text.
• On the charts, the axes' titles must be moved from the scales to the same distance of at least 0.5 cm.
• At least one size (height or width) of the subfigures should be the same. The horizontally located subfigures should have the same height, and the vertically located ones should have the same width.

• Figures must be of good quality (at least 300 dpi). The inscriptions on the figures should be clear and readable, the lines of the figure should not be blurred. There should be no noise in the figure. 

• The editorial board reserves the right to reject a paper if the authors refuse to provide the original figure files to avoid data falsification (dwg ‒ for CAD-system drawings (COMPAS, SolidWorks, AutoCad), cdr ‒ for CorelDRAW files; xls/xlsx ‒ for Excel, etc.).

• The table header does not contain blank cells.
• If the table in your document is divided into several pages, you do not need to re-sign the header on a new page.
• All tables should be vertical.

• Formulas should be typed in the MathType equation editor.
• Links to the formula in the text should look like (1), (2)–(4).
• Formulas should be numbered.
• Numbering alignment to the right.
• The formula is part of the text, so after a formula must stand semantic mark: if the new proposal goes further, then the dot, if further clarification is the comma.

• References should take the form [1], [2–6].
• References should be in the order of their mention in the article.

• All literature references cited in the Literature part, reference should be in the text necessarily!

• Sources are made according to the standard.
• Sources must be at least 10.
• The list of references should have at least 60 % foreign sources.
• If GOSTs and national standards are used in the references, their foreign analogues must be given.
• The percentage ratio of self-citations is no more than 30 % (ie, if you used 10 references, no more than 3 of them can be to your works).
• All sources must be unique (one source is mentioned only once in the bibliography).
• All sources must be provided in the original language (i.e. if an article/book, etc. was published in Ukrainian, sources should also be added to the list of references in Ukrainian, and not a translator or transliteration should be used).
• Before submitting the manuscript to the editor, it is necessary to check all URL sources for operability.
• Sources belonging to the Q1 and Q2 Scopus quartiles should be highlighted in purple. To check the journal for belonging to a quartile, you can use this video.

• References in a language articles, translated into English.
• References must be completed according to the standard.

• If the author uses AI to select literature, the correctness of the references (reality and correctness of their design) must be checked by the author(s) before submitting the manuscript.

Please provide information about each author according to the example below (in a clear sequence):

The author's ORCID ID is required. ORCID provides a unique and persistent digital identifier that distinguishes researchers from every other researcher, even those who share the same name, and, through integration in key research workflows such as manuscript and grant submission, supports automated linkages between researchers and their professional activities, ensuring that their work is recognized.

1. Send to e-mail:  c7508990@gmail.com or eejet@entc.com.ua.
2. Post an article on-line through the platform OJS (Open journal system).

3. Come to the Editor at the address Shatylova dacha str., 4, of. 702, Kharkiv, Ukraine, 61165 (during the period of combat operations, personal reception is not carried out).

All manuscripts are first checked by the editor. Only those manuscripts that meet the standards of the journal, and fit within its aims and scope, will be sent to expert reviewers.

Deadline from 2 weeks till 2 months 

1. After the article has passed the priority check, it is necessary to provide a package of documents and pay an advance payment after which your article is sent for processing to the editor.

**The editing procedure involves checking the article for formal features, the correctness of the design according to the requirements.

2. Get the answer from the editors of the journal. If there are corrections, it is necessary to take into account all comments and send the revised article back by e-mail to c7508990@gmail.com or eejet@entc.com.ua.

Deadline 1-6 months

1. Our editorial staff is practicing a double-blind peer review.

*Review procedure involves checking for plagiarism, verification of compliance the article title and content, check the content of the article. 

2. Get response from reviewers. If there are corrections, it is necessary to take into account all the comments of the reviewers and send the revised article back by e-mail to c7508990@gmail.com or eejet@entc.com.ua.
3. If there are no corrections or the article is revised in accordance with the comments of the reviewers, then the article will be accepted for publication in the journal based on the results of a double-blind peer review.

(Details...)

• Making Article in accordance with the requirements.
• Professional technical translation of the article into English.
• Making a list of references.
• Editing pictures.
• Formula design in the MathType formula editor.

• Prepare for publishing your articles to other Ukrainian and foreign scientific publications.

• The electronic version of the journal can be seen in the archive on our site.